We do have a spare tire lock that can be keyed alike, but the Tow Ready Spare Tire Lock # FSTL0603 cannot be keyed alike.
Our etrailer.com Spare Tire Lock # e98892 can be keyed alike. Just click on the keyed alike option and choose the quantity that you would like before adding this item to your cart. view full answer...
That's a really good question, and what you want to measure is the thickness of the rim at the bolt hole, including the mounting plate, for the etrailer Spare Tire Lock for 1/4" to 7/8" Thick Rims # e98892.
So long as it is in between that wide variance of 1/4 inch to 7/8 inch then you can use this lock to secure your spare tire.
I have added a link below to a video review for you to check out as well of the etrailer Spare Tire Lock # e98892. view full answer...
I believe we have what you are looking for with the etrailer Spare Tire Lock # e98892.
This locks the lug bolt opening and this is a 2-piece lock that threads together, as you can see in the linked installation video. This lock will work so long as your rim has a thickness between 1/4" and 7/8". view full answer...
While there isn't an individual high-mount spare tire carrier and lock set, you can add a wheel lock to go with the Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels # FSTC1000301.
Assuming you have 1/2" wheel bolts, all you need is the Wheel Lock Set for 1/2" Wheel Bolts # RG01-150. view full answer...
The etrailer.com Spare Tire Lock, part # e98892, can be ordered in multiples that are keyed alike. There is a modest up-charge for this feature. When placing your order you can select the Keyed Alike option in the drop-down menu box.
This lock is adjustable to fit rims between 1/4-inch and 7/8-inch thickness. view full answer...
This particular product, Master Lock # 262DAT, is manufactured with unique keys. In order to have multiple locks all keyed the same you will need a lock such as the Dead Bolt # e98892.
This all steel dead bolt can be ordered in multiples with the same key for a small up-charge per lock. Simply select the Keyed Alike option before adding the locks to your shopping cart. view full answer...
There is no way to lock the Lippert RV Spare Tire Carrier with Winch # LC159041 as it ships from the factory. You would need to weld on a tab which would allow you to use a Pin # 37201211 by drilling a hole through the tab and shaft for the winch. We do have a Replacement Winch # LC159056 you can use to replace your current winch since the internal brake is not holding the tire in place. Lippert does note with these to not over crank or use any power tools to raise/lower the tire as that... view full answer...
Thanks for the kind words about the website, and you mentioned 1-1/2" hitch for your CR-V, but I believe you meant 1-1/4" as there isn't actually a 1-1/2" hitch made. And while there isn't a carrier for a 1-1/4" hitch, there is 1-1/4" to 2" hitch adapter so you can use the Hitch Mounted Spare Tire Carrier - 2" Hitch # e98ZR.
What you can do is use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD.
It's important to note though that the use of any adapter reduces the capacity... view full answer...
It will not; the back-up camera is up at the top of your Forest River Forester motorhome, so the Roadmaster spare tire carrier will not block the view at all, it will be perfectly clear. The correct part number for that spare tire carrier is the following:
- Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening # RM-195225 view full answer...
For tire size 225/75-15, the diameter is 28.4 inches. I recommend a spare tire cover like part # 052963753479.
All of the spare tire covers we offer have an elastic hem at the back that secures the cover to the tire. I have attached a photo that shows the elastic seam on the back of the cover you can check out. view full answer...
To avoid damage, Yakima recommends removing the bikes from the rack before opening the tail gate. Following this advice will ensure that your door and hinges will remain damage free.
The weight of the rack itself will not hurt anything, and would allow the door to open and close without any worry of damage. Adding the weight of the bikes into the equation leaves open the possibility of the hinges being damaged. view full answer...
There are no stake pocket spare tire carriers for a trailer that fit a 5" wide x 1-1/2" deep stake pocket. For a spare tire carrier on your Lowe's trailer you'll need to get one that clamps onto the frame/tongue, the Flint Hill Goods Spare Tire Carrier # FHG57ZR.
The # FHG57ZR clamps around frames up to 3" wide x 5" tall and has a 100 lb weight capacity, which is more than enough for the tires on your trailer. view full answer...
I see you were looking at the Karrier ST215/75R14 Radial Trailer Tire with 14" Aluminum Wheel # AM32195. While having the same size tire and bolt pattern is really all that is needed with a spare trailer tire you will want to make sure they also have the same load range as your current tires. This tire is a load range C with 1,870lbs capacity. It is okay if the tires are different manufacturers and if they require different air pressures as they are only supporting the load of the trailer.... view full answer...
I spoke with my contact at WeatherTech and she told me that with the one-piece mat, part # WT443412, in place you will be able to easily access your spare tire without removing the seats.
I have included a video review of part # WT443412 being installed on a 2012 Honda Odyssey for you to check out. view full answer...
The TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster # TM29FR only has a capacity of six sensors so when syncing the sensors to the monitor you can just set the spare as the 5th sensor. This system is designed for use on high pressure valve stems rated over 65 psi so you'll want to verify that your valve stems can handle the weight of the sensors. view full answer...
We do offer the mounting back plate for the Surco Spare Tire Cargo Basket.
To order this part you would need part # SPN550. This is offered as a separate item. This is designed to work for the Surco Spare Tire Cargo Basket, part # SPSJ4319. view full answer...
You will still be able to access the spare tire on your 2009 Lexus RX 350 after installing Curt Class III Trailer Hitch # 13530. If you refer to the linked photo you can see the hitch and tire positions after installation. The spare can be removed for a tire change by simply letting the forward edge drop first and then maneuvering the tire past the exhaust and the hitch cross tube. view full answer...
We offer several different color and size spare tire covers that can be used on RVs. We do not offer screen printing, but you can purchase the covers and find a local screen printer that should be able to take care of that for you.
I have attached a link to the spare tire covers we offer you can check out. The covers do come in various sizes depending on the size of the tire. An example is part # CAM45345. This is an arctic white cover that fits 28 inch diameter tires. This is a vinyl... view full answer...
The weight is just 19 lbs for the Demco spare tire carrier for trailer tongues; it also comes in your choice of silver or black in color (the weight is the same for each):
- Silver: Demco Spare Tire Carrier for up to 4" Trailer Tongue # DM15851-52
- Black: Demco Spare Tire Carrier for up to 4" Trailer Tongue # DM15851-76
As for mounting, it does need to be mounted vertically so the weight is centered on the carrier itself as opposed to on the mounting hardware.
There isn't actually... view full answer...
We have a number of different options that may allow you to carry a spare tire, but nothing that is designed to fit a frame that is 4" wide x 6" tall. The best option may be the Rack'em Spare Tire Rack for Enclosed Trailers # RA-16.
This is for enclosed trailers but may work for you if you have the space. I have added a link to a video review I recommend checking out.
The other option isn't on your trailer but would be if your tow vehicle had a front-mounted hitch; you would then be able... view full answer...
Go To Results